Has anyone with an N52 X3 gotten EDIABAS to communicate with their DME (MSV80.1)? Since I used INPA/NCS/NFS the first time, I have never been able to access this, but all the other modules communicate fine. I receive "EDIABAS error 100: SYS-0010: INITIALIZATION ERROR." The description/solution for this error is no help at all. I have tried v53, v49, and v46 sp-daten's, all producing the same result. (Before anyone suggests/asks, it is not the cable.)
I was able to ignore this issue until now. I decided to update my transmission software via WinKFP, and received the message indicated programming was successful. I now get the yellow ABS, red BRAKE, and yellow 4x4 lights on the instrument cluster, along with the airbag light. DTC's (from INPA) indicate "transfer case clutch position unknown." This is corresponding to the "trio" of drivetrain lights. Basically, my X3 is driving perfectly fine, but in full RWD only with no ABS. I am hoping the airbag light will resolve itself as i resolve this, more pressing, matter, but if not I will fix that after. I was not receiving the "trio" of lights intermittently prior to updating my transmission, and I do not/have never heard the grinding noise associated with the transfer case gear worn down by the worm gear, so I do not think that is the issue. I believe that if I cleared learned values and re-calibrated the transfer case, I could resolve this issue, but I have yet to see a way to do this with INPA/NCS/NFS. I am currently attempting to get a working DIS or ISTA installation so that I can try this, but if anyone has any input here, it is welcomed.
'08 E83 X3 prod 09/07
I was able to ignore this issue until now. I decided to update my transmission software via WinKFP, and received the message indicated programming was successful. I now get the yellow ABS, red BRAKE, and yellow 4x4 lights on the instrument cluster, along with the airbag light. DTC's (from INPA) indicate "transfer case clutch position unknown." This is corresponding to the "trio" of drivetrain lights. Basically, my X3 is driving perfectly fine, but in full RWD only with no ABS. I am hoping the airbag light will resolve itself as i resolve this, more pressing, matter, but if not I will fix that after. I was not receiving the "trio" of lights intermittently prior to updating my transmission, and I do not/have never heard the grinding noise associated with the transfer case gear worn down by the worm gear, so I do not think that is the issue. I believe that if I cleared learned values and re-calibrated the transfer case, I could resolve this issue, but I have yet to see a way to do this with INPA/NCS/NFS. I am currently attempting to get a working DIS or ISTA installation so that I can try this, but if anyone has any input here, it is welcomed.
'08 E83 X3 prod 09/07
0 commentaires:
Enregistrer un commentaire